{"id":5087,"date":"2026-11-18T18:46:41","date_gmt":"2026-11-18T10:46:41","guid":{"rendered":"https:\/\/ptfesuppliers.com\/?p=5087"},"modified":"2026-11-18T18:46:41","modified_gmt":"2026-11-18T10:46:41","slug":"custom-ptfe-tubing-what-buyers-should-specify","status":"publish","type":"post","link":"https:\/\/ptfesuppliers.com\/fr\/custom-ptfe-tubing-what-buyers-should-specify\/","title":{"rendered":"Custom PTFE Tubing: What Buyers Should Specify"},"content":{"rendered":"<p><strong>Short answer:<\/strong> specifying custom PTFE tubing well means stating five things beyond the dimensions: resin grade, minimum wall (not just nominal), tolerance class and inspection method, end condition (coiled vs cut, with end finish), and the property the application actually depends on &mdash; dielectric strength, purity, pressure rating or bending radius. Dimension-only specs force the manufacturer to guess the purpose, and guessing shows up in your validation.<\/p>\n<p>Custom tubing differs from catalogue tubing in one way: there is no history of what works. The specification has to carry that history instead. Below are the five fields, what each controls, and the failure each prevents.<\/p>\n<h2>1. Resin grade and additive declaration<\/h2>\n<p>Virgin PTFE for purity and dielectrics; conductive or anti-static grades (carbon-loaded) where static discharge or EMI matters; pigmented grades for line identification. Name the grade class and require it on the shipment certificate &mdash; visual inspection cannot distinguish a conductive tube from a black-pigmented one, and the mistake is expensive.<\/p>\n<h2>2. Minimum wall, not nominal wall<\/h2>\n<p>Extrusion produces wall variation; burst pressure, dielectric strength and permeation all key off the <em>minimum<\/em>. Write &#8220;wall 1.0 mm, min 0.85 mm&#8221; and ask how eccentricity is measured (typically at 4 or 8 points around the circumference). This single line prevents the most common custom-tubing dispute.<\/p>\n<h2>3. Tolerance class and how it&#8217;s proven<\/h2>\n<p>Small-bore paste-extruded tube holds &plusmn;0.05 mm ID routinely; large bore does not. State the class and require dimensional reports per lot &mdash; not &#8220;inspectable on request&#8221;, which means unmeasured.<\/p>\n<h2>4. End condition and packaging<\/h2>\n<p>Coils need a minimum bend radius statement; cut lengths need cut-end quality (burr-free, square or angled as fitted), length tolerance, and packaging that protects ends. Semiconductor buyers should specify double-bagging and cleanroom packing explicitly.<\/p>\n<h2>5. The functional property, stated as a test<\/h2>\n<ul>\n<li><strong>Fluid transfer:<\/strong> pressure rating at temperature (burst-tested, not calculated).<\/li>\n<li><strong>Electrical:<\/strong> dielectric strength per lot (typ. &ge;10 kV\/mm thin-wall) with spark-test evidence.<\/li>\n<li><strong>High purity:<\/strong> extractables or TOC documentation for the semiconductor duty.<\/li>\n<li><strong>Permeation-limited service:<\/strong> wall thickness justified against the media and temperature, not assumed.<\/li>\n<\/ul>\n<p>Chunhuan extrudes custom PTFE tubing in-house (0.5&ndash;200 mm ID, virgin and filled grades) with lot-level dimensional and functional test documentation &mdash; see the <a href=\"https:\/\/ptfesuppliers.com\/product-category\/ptfe-products\/ptfe-tube\/\">PTFE tube program<\/a>. A specification written in these five fields gets you a firm quote with named tolerances, and a tube that passes validation the first time.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>What should a custom PTFE tubing specification include?<\/h3>\n<p>Resin grade, dimensions with minimum wall, tolerance class with inspection method, end condition and packaging, and the functional property (pressure, dielectric, purity) stated as a test.<\/p>\n<h3>Why specify minimum wall instead of nominal?<\/h3>\n<p>Burst pressure, dielectric strength and permeation all depend on minimum wall. Nominal-only specs allow eccentricity to eat the functional margin.<\/p>\n<h3>Can PTFE tube be made conductive?<\/h3>\n<p>Yes &mdash; carbon-loaded grades provide anti-static or conductive behavior. Require the grade on the certificate; black pigment alone proves nothing.<\/p>\n<h3>How is PTFE tubing pressure rated?<\/h3>\n<p>By burst testing at temperature, not by calculation alone. Ask for the test basis behind any quoted pressure rating.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What should a custom PTFE tubing specification include?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Resin grade, dimensions with minimum wall, tolerance class with inspection method, end condition and packaging, and the functional property (pressure, dielectric, purity) stated as a test.\"}}, {\"@type\": \"Question\", \"name\": \"Why specify minimum wall instead of nominal?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Burst pressure, dielectric strength and permeation all depend on minimum wall. Nominal-only specs allow eccentricity to eat the functional margin.\"}}, {\"@type\": \"Question\", \"name\": \"Can PTFE tube be made conductive?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes &mdash; carbon-loaded grades provide anti-static or conductive behavior. Require the grade on the certificate; black pigment alone proves nothing.\"}}, {\"@type\": \"Question\", \"name\": \"How is PTFE tubing pressure rated?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"By burst testing at temperature, not by calculation alone. Ask for the test basis behind any quoted pressure rating.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A practical guide to custom PTFE tubing, covering specification details, supplier evaluation and questions to resolve before ordering.<\/p>","protected":false},"author":1,"featured_media":5088,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[212,216,217],"tags":[],"class_list":["post-5087","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-application-area","category-general-industrial","category-ptfe-tubes-rods-sheets"],"_links":{"self":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5087","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/comments?post=5087"}],"version-history":[{"count":1,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5087\/revisions"}],"predecessor-version":[{"id":5408,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5087\/revisions\/5408"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/media\/5088"}],"wp:attachment":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/media?parent=5087"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/categories?post=5087"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/tags?post=5087"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}