{"id":5228,"date":"2026-11-17T22:20:06","date_gmt":"2026-11-17T14:20:06","guid":{"rendered":"https:\/\/ptfesuppliers.com\/?p=5228"},"modified":"2026-11-17T22:20:06","modified_gmt":"2026-11-17T14:20:06","slug":"ptfe-lined-pipe-dimensions-what-to-include-in-an-rfq","status":"publish","type":"post","link":"https:\/\/ptfesuppliers.com\/fr\/ptfe-lined-pipe-dimensions-what-to-include-in-an-rfq\/","title":{"rendered":"PTFE Lined Pipe Dimensions: What to Include in an RFQ"},"content":{"rendered":"<p><strong>Short answer:<\/strong> A PTFE lined pipe RFQ needs six things: nominal size and pressure class, face standard and drilling (ANSI\/DIN\/JIS), lining thickness, end-to-end and face-to-face lengths, media with temperature range, and any fittings (elbows, tees, spacers). Missing any one of these usually means the quote comes back with assumptions you did not agree to.<\/p>\n<p>Lined pipe is a system purchase, not a commodity one. Unlike bare pipe, dimensions are driven by the lining process, so two &#8220;identical&#8221; DN80 elbows from different makers may not share a flange-to-face dimension \u2014 which matters enormously when you are matching an existing installed line.<\/p>\n<h2>The Six RFQ Fields, Explained<\/h2>\n<ol>\n<li><strong>Size and pressure class<\/strong> \u2014 DN\/NPS and the flange rating. Lined pipe commonly serves up to 10\u201316 bar depending on size and temperature.<\/li>\n<li><strong>Face standard<\/strong> \u2014 ANSI B16.5, DIN 2576\/2632, or JIS. State it explicitly; mixed-standard sites are common and this is the #1 cause of mismatched spools.<\/li>\n<li><strong>Lining thickness<\/strong> \u2014 typical is 2.5\u20134 mm for pipe; specify if your corrosion engineer sized something specific. Ask whether thickness is nominal or minimum.<\/li>\n<li><strong>Lengths<\/strong> \u2014 face-to-face per piece and total run. Lined pipe usually comes in fixed lengths (1.5 m, 3 m); custom spools need each length listed line by line.<\/li>\n<li><strong>Media and temperature<\/strong> \u2014 including excursions. Permeation behavior and liner grade (PTFE vs PFA) depend on it.<\/li>\n<li><strong>Fittings list<\/strong> \u2014 every elbow degree, tee, reducer and spacer, itemized. Fittings are priced and made individually.<\/li>\n<\/ol>\n<h2>Two Dimensions People Forget<\/h2>\n<p><strong>Vacuum rating:<\/strong> if the line can see vacuum, state it. Lined pipe needs vacuum rings or reinforced liners above certain temperatures \u2014 discovering this after delivery is expensive.<\/p>\n<p><strong>Conductive vs static liner:<\/strong> if the media is a flammable liquid, anti-static lined pipe per applicable specifications may be mandatory. This changes the liner and the price; it cannot be retrofitted.<\/p>\n<h2>A Working RFQ Line-Item Format<\/h2>\n<table border=\"1\">\n<tr>\n<th>Item<\/th>\n<th>Spec<\/th>\n<\/tr>\n<tr>\n<td>Elbow 90\u00b0<\/td>\n<td>DN80, DIN PN10, lined PTFE 3 mm min, R=1.5D, face-to-face 200 mm<\/td>\n<\/tr>\n<tr>\n<td>Straight<\/td>\n<td>DN80 \u00d7 3000 mm, lined PTFE 3 mm min<\/td>\n<\/tr>\n<tr>\n<td>Media<\/td>\n<td>30% HCl, 20\u201380 \u00b0C, no vacuum, no static requirement<\/td>\n<\/tr>\n<\/table>\n<p>Chunhuan produces PTFE\/PFA lined pipe and fittings to customer face-to-face requirements with lot-traceable liner certificates; send the media data and we return a lining recommendation with the quote.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>What dimensions matter most in a PTFE lined pipe RFQ?<\/h3>\n<p>Flange face standard (ANSI\/DIN\/JIS), face-to-face lengths per piece, and lining thickness. These three cause nearly all mismatches with existing installations.<\/p>\n<h3>Do PTFE lined pipes come in standard lengths?<\/h3>\n<p>Commonly 1.5 m and 3 m; custom spools are made to your listed face-to-face lengths, so itemize every piece in the RFQ.<\/p>\n<h3>What lining thickness is typical for PTFE lined pipe?<\/h3>\n<p>Usually 2.5\u20134 mm. Specify whether you need nominal or minimum-guaranteed thickness \u2014 the difference affects corrosion life.<\/p>\n<h3>When does lined pipe need vacuum rating or anti-static liner?<\/h3>\n<p>Vacuum service above the liner&#8217;s unsupported rating needs rings or reinforced liners; flammable media typically requires anti-static liner. Both must be stated at RFQ stage.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What dimensions matter most in a PTFE lined pipe RFQ?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Flange face standard (ANSI\/DIN\/JIS), face-to-face lengths per piece, and lining thickness. These three cause nearly all mismatches with existing installations.\"}}, {\"@type\": \"Question\", \"name\": \"Do PTFE lined pipes come in standard lengths?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Commonly 1.5 m and 3 m; custom spools are made to your listed face-to-face lengths, so itemize every piece in the RFQ.\"}}, {\"@type\": \"Question\", \"name\": \"What lining thickness is typical for PTFE lined pipe?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Usually 2.5\u20134 mm. Specify whether you need nominal or minimum-guaranteed thickness \u2014 the difference affects corrosion life.\"}}, {\"@type\": \"Question\", \"name\": \"When does lined pipe need vacuum rating or anti-static liner?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Vacuum service above the liner's unsupported rating needs rings or reinforced liners; flammable media typically requires anti-static liner. Both must be stated at RFQ stage.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A practical guide to PTFE lined pipe dimensions, covering specification details, supplier evaluation and questions to resolve before ordering.<\/p>","protected":false},"author":1,"featured_media":5229,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[212,227,226],"tags":[],"class_list":["post-5228","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-application-area","category-ptfe-pfa-lining-pumps-valves-sealing-systems","category-pumps-valves-sealing-systems"],"_links":{"self":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5228","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/comments?post=5228"}],"version-history":[{"count":1,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5228\/revisions"}],"predecessor-version":[{"id":5407,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5228\/revisions\/5407"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/media\/5229"}],"wp:attachment":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/media?parent=5228"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/categories?post=5228"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/tags?post=5228"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}