{"id":5291,"date":"2026-11-19T03:16:13","date_gmt":"2026-11-18T19:16:13","guid":{"rendered":"https:\/\/ptfesuppliers.com\/?p=5291"},"modified":"2026-11-19T03:16:13","modified_gmt":"2026-11-18T19:16:13","slug":"ptfe-tube-tolerances-what-engineering-buyers-need-to-confirm","status":"publish","type":"post","link":"https:\/\/ptfesuppliers.com\/fr\/ptfe-tube-tolerances-what-engineering-buyers-need-to-confirm\/","title":{"rendered":"PTFE Tube Tolerances: What Engineering Buyers Need to Confirm"},"content":{"rendered":"<p><strong>Short answer:<\/strong> For PTFE tube, engineering buyers should confirm four tolerance groups before ordering: OD and ID (usually \u00b10.05\u20130.1 mm on precision grades), wall thickness concentricity (the hidden variable that affects pressure rating), length (\u00b11 mm is standard; tighter costs more), and \u2014 for tubing destined for fittings \u2014 ovality. PTFE&#8217;s thermal expansion means every tolerance is only meaningful at a stated temperature.<\/p>\n<p>Tube tolerances are where PTFE differs most from metal sourcing. The material is dimensionally &#8220;soft&#8221; in every sense: it moves with temperature, deforms under handling, and can relax after cutting.<\/p>\n<h2>The Four Tolerance Groups<\/h2>\n<ol>\n<li><strong>OD\/ID:<\/strong> standard commercial tubing runs wider bands; precision tube holds \u00b10.05 mm. State which positions are fitting-sealing surfaces \u2014 those need the tight band, the rest doesn&#8217;t.<\/li>\n<li><strong>Concentricity\/wall:<\/strong> the underrated one. A tube at nominal wall but off-center has a thin side that governs burst pressure. For pressure duties, ask for minimum wall, not nominal.<\/li>\n<li><strong>Length:<\/strong> \u00b11 mm on cut lengths is routine. Autoclave or fixture-critical lengths justify \u00b10.2 mm at modest premium.<\/li>\n<li><strong>Ovality:<\/strong> compression fittings seal on round tube. Shipping coils flattened tube; specify straight or supported packaging for fitting-duty tube.<\/li>\n<\/ol>\n<h2>Temperature: The Fine Print That Isn&#8217;t Fine<\/h2>\n<table border=\"1\">\n<tr>\n<th>Factor<\/th>\n<th>Practical effect<\/th>\n<\/tr>\n<tr>\n<td>Thermal expansion (~10\u00d7 steel)<\/td>\n<td>A tube at \u00b10.05 mm at 20 \u00b0C is out of band near 60 \u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Post-cut relaxation<\/td>\n<td>Cut ends can deform; squareness needs bore support<\/td>\n<\/tr>\n<\/table>\n<p>Always ask at what temperature the supplier&#8217;s tolerance applies, and measure incoming parts at controlled temperature if you&#8217;ll verify against it.<\/p>\n<h2>RFQ Wording That Works<\/h2>\n<p>&#8220;PTFE tube, OD 12.7 mm +0.05\/\u22120.05, ID 9.5 mm \u00b10.1, minimum wall 1.4 mm, cut length 500 \u00b10.5 mm, tolerances valid at 23 \u00b0C, straight packaging.&#8221; One sentence; zero assumption gaps. Chunhuan supplies precision PTFE tubing to stated tolerances with temperature-referenced measurement records.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>What tolerances can precision PTFE tubing hold?<\/h3>\n<p>OD\/ID at \u00b10.05 mm is achievable on precision grades; commercial tubing runs wider. Cut lengths hold \u00b11 mm standard, \u00b10.2 mm at premium.<\/p>\n<h3>Why is wall concentricity important for PTFE tube?<\/h3>\n<p>An off-center wall means one thin side governs burst pressure. For pressure duties, specify minimum wall rather than nominal.<\/p>\n<h3>At what temperature are PTFE tube tolerances valid?<\/h3>\n<p>Whatever the supplier states \u2014 typically 23 \u00b0C. PTFE&#8217;s thermal expansion is roughly 10\u00d7 steel, so tolerances drift with temperature.<\/p>\n<h3>How should tube for compression fittings be specified?<\/h3>\n<p>Tight OD tolerance plus ovality control and straight\/supported packaging \u2014 fittings seal on round, undistorted tube.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What tolerances can precision PTFE tubing hold?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"OD\/ID at \u00b10.05 mm is achievable on precision grades; commercial tubing runs wider. Cut lengths hold \u00b11 mm standard, \u00b10.2 mm at premium.\"}}, {\"@type\": \"Question\", \"name\": \"Why is wall concentricity important for PTFE tube?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"An off-center wall means one thin side governs burst pressure. For pressure duties, specify minimum wall rather than nominal.\"}}, {\"@type\": \"Question\", \"name\": \"At what temperature are PTFE tube tolerances valid?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Whatever the supplier states \u2014 typically 23 \u00b0C. PTFE's thermal expansion is roughly 10\u00d7 steel, so tolerances drift with temperature.\"}}, {\"@type\": \"Question\", \"name\": \"How should tube for compression fittings be specified?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Tight OD tolerance plus ovality control and straight\/supported packaging \u2014 fittings seal on round, undistorted tube.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A practical guide to PTFE tube tolerances, covering specification details, supplier evaluation and questions to resolve before ordering.<\/p>","protected":false},"author":1,"featured_media":5292,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[212,216,217],"tags":[],"class_list":["post-5291","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-application-area","category-general-industrial","category-ptfe-tubes-rods-sheets"],"_links":{"self":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5291","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/comments?post=5291"}],"version-history":[{"count":1,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5291\/revisions"}],"predecessor-version":[{"id":5410,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/posts\/5291\/revisions\/5410"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/media\/5292"}],"wp:attachment":[{"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/media?parent=5291"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/categories?post=5291"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ptfesuppliers.com\/fr\/wp-json\/wp\/v2\/tags?post=5291"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}