Custom PTFE Bushings: Dimensions and Application Information to Provide

Short answer: for custom PTFE bushings, provide: shaft diameter and running clearance target (or shaft/housing dimensions plus load and speed), operating temperature band, load direction and magnitude, media, and quantity split. PTFE bushings are designed around clearance-at-temperature and creep under load — two numbers that must be calculated for your duty, not copied from a bronze chart.

PTFE bushings fail by two mechanisms only: clearance lost to thermal expansion and cold flow, or wear. Both are predictable, which is why a good bushing quote asks more questions than the drawing shows. Here is what to provide and why each item changes the design.

Clearance: the number that rules the part

PTFE’s thermal expansion (~10x steel) means a bushing snug at 20°C may seize at 150°C, or a designed running clearance may double at low temperature. Provide the full temperature band; the manufacturer sets room-temperature clearance so service-temperature clearance lands in the workable band. For loaded bushings, cold flow shifts clearance over time — filled grades (glass, bronze) reduce the shift 2–5x and are the default for load-carrying bushings.

Load and speed: which PTFE survives

  • Low load, slow oscillation: virgin PTFE works and is cheapest.
  • Continuous load or rotation: filled PTFE (bronze for load, carbon/graphite for wear) — virgin will cold-flow flat.
  • High PV (pressure-velocity): beyond filled PTFE’s envelope; say so early — an honest supplier will redirect you rather than quote a part that flattens in weeks.

What to send with the RFQ

ItemWhy
Shaft Ø, housing Ø, length, temperature bandClearance calculation at service temperature
Load (N and direction), speed, cyclinghttps://ptfesuppliers.com/product-category/rade selection and cold-flow allowance
Media (lubricated? chemical?)Filler chemistry caveats
Quantity + forecastMold vs machine route decision
Drawing with functional dimension markedWhich tolerance gets ±0.05 mm treatment

Chunhuan machines and molds bushings from its own PTFE rod and blanks since 1985, ±0.05 mm under SPC, with first-article inspection. Send the six items; the quote should come back naming grade, clearance basis and route — the three decisions that determine whether the bushing lasts.

Frequently Asked Questions

What clearance should a PTFE bushing have?

Enough that clearance remains workable at the hottest service temperature, accounting for PTFE’s ~10x-steel expansion and creep. Calculate from the temperature band — don’t copy bronze charts.

Can PTFE bushings carry continuous load?

Only filled grades (bronze, glass) — virgin PTFE cold-flows flat under sustained load. State load magnitude and direction so the grade is chosen correctly.

What information does a bushing RFQ need?

Shaft/housing dimensions, temperature band, load and speed, media, quantities with forecast, and a drawing marking the functional dimension.

Facebook
Twitter
LinkedIn
WhatsApp

Leave a Reply

Your email address will not be published. Required fields are marked *

Send Your Inquiry Today